Hello all....
First time configuring JUNOS for netflow\jflow. Found a simple Juniper KB config sample ...which is exactly the config found on SolarWinds site....which is my flow collector. Switch is an EX 4300-32F
So,,,,here's my config - want to monitor the flows on an AE interface...
and the check out fails and I'm not sure why. I tried to raise the rate to 1000.... sampling only input..same results.
Appreciate the help !
commit check
error: Check-out pass for Traffic sampling control process (/usr/sbin/sampled) dumped core (0x8b)
error: configuration check-out failed
set interfaces ae0 unit 0 family inet sampling input output
set forwarding-options sampling input rate 100 (1 out of 100 packets is sampled)
set forwarding-options sampling family inet output flow-server 10.1.2.20 port 2055 version 5
root@Myl_Core_1# show | compare
[edit interfaces ae0 unit 0 family inet]
+ sampling {
+ input;
+ output;
+ }
[edit forwarding-options]
+ sampling {
+ input {
+ rate 100;
+ }
+ family inet {
+ output {
+ flow-server 10.1.2.20 {
+ port 2055;
+ version 5;
+ }
+ }
+ }
+ }