Hello,
@Seyma wrote:
1. Does above config is the correct combine condtions to activate filer of one specific interface (xe-0/1/6) at 16:32 to 16:35?
You forgot to apply the group:
set interfaces apply-groups time-based-filter
@Seyma wrote:
2. Without including "interface" within the group, does that mean it apply to every interfaces?
Not sure what You actually meant. The "interfaces {" the top-level stanza, You cannot skip top-level stanzas in the groups.
If You mean specifying interface as wildcard - like below:
set groups BLAH interfaces <*> <blah-blah-whatever>
- then it depends on the group application point. If You do:
set interfaces apply-groups BLAH
- then it will be applied to EVERY interface defined in the config.
If You apply this group like below:
set interfaces xe-0/0/0 apply-groups BLAH
- then it will apply only to xe-0/0/0 even though the group BLAH has a wildcard.
HTH
Thx
Alex