Junos
Highlighted
Junos

Unable to add a new l2circuit

10.12.17   |  
a week ago

Hello,

 

I'm having a problem adding a new L2 circuit to my MX80 router.  I currently have 6 other pseudowires connected to other routers from this one, but trying to add another gives the error:

 

[edit interfaces ge-1/1/2 unit 0]
'family'
Only the CCC family is allowed on CCC interfaces
error: configuration check-out failed

 

The config for the port is:

 

ge-1/1/2 {
     encapsulation ethernet-ccc;
     unit 0 {
          family ccc;
     }
}

....which is the same format as for the other pseudowires.

 

If I remove 'unit 0' and 'family ccc' from the interface then it passes the commit check ok.

 

The config for the l2circuit is:

 

interface ge-1/1/2.0 {
    virtual-circuit-id 1010;
}

The box is running JunOS 13.3R8.7   - is there some kind of limit to the number of pseudowires that can be configured?

 

Thanks for your help.

 

Stuart

1 REPLY
Junos

Re: Unable to add a new l2circuit

10.12.17   |  
a week ago

Found the problem.  There was some legacy config of:

 

set groups inline-jflow interfaces <ge-1/1/*> unit <*> family inet sampling input

which was being inherited and causing the problem.