Junos OS

Where to read the documentation on adjustment aux port for j-4350

Many thanks

Hi,

 

e.g. http://www.juniper.net/techpubs/software/jseries/junos93/index.html. Download Getting Started Guide for J4350. You would then find following statement:

 

>>The port labeled AUX on the front panel of the J-series Services Router is for future use and is not activated.

 

At the moment I do not know whether it is supported with later versions as 9.3. I will check.

 

Kind Regards

Michael Pergament

Thanks big, I read it already, I thought have not found the documentation. I thought it is possible to adjust as in Cisco :-)))

Hi, 

 

New Features in JUNOS Release 9.6 for J Series Services Routers:

http://www.juniper.net/techpubs/en_US/junos9.6/information-products/topic-collections/release-notes/9.6/j-series-new-features.html#rn-junos-es-features

 

Reverse Telnet—Reverse Telnet allows you to configure J Series devices to listen on a specific port for Telnet and SSH (secure shell) services. When you connect to that port, the device provides an interface to the auxiliary port on the device. In order to use reverse Telnet, you must have the following: a device with an auxiliary port running the appropriate version of JUNOS Software , and a device with a console port for remote management (if network connectivity fails and you want to use console access). To configure reverse Telnet, use the reverse telnet port and reverse ssh port statements at the [set system services] hierarchy level. 

 

Managing Administrator Authentication/Reverse Telnet:   

http://www.juniper.net/techpubs/software/junos-security/junos-security96/junos-security-admin-guide/reverse-telnet.html#reverse-telnet

 

Just noticed, not tested, 

jtb