Junos OS

last person joined: yesterday 

Ask questions and share experiences about Junos OS.

  • 1.  enabling rfc2544-benchmarking on QFX-5100

    Posted 10-03-2019 07:44

    Hi,

     

      I whant to run a throughput test between 2 QFX-5100.

      I enabled the RPM on both of the machines,

      I made the following configurations:

     

     

    NITIATOR/TERMINATOR

     

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT test-type throughput

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 4016

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 1518

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT bandwidth-kbps 100000

     

     

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-profile RFC2544-THROUGHPUT

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 mode reflect

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 family inet

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-udp-port 4001

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-udp-port 4001

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-iterator-duration 120

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-interface irb.3688

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-ipv4-address 192.168.200.2

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-ipv4-address 192.168.200.1

     

     

    REFLECTOR:

     

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT test-type throughput

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 4016

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT packet-size 1518

    set services rpm rfc2544-benchmarking profiles test-profile RFC2544-THROUGHPUT bandwidth-kbps 100000

     

     

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-profile RFC2544-THROUGHPUT

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 mode initiate-and-terminate

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 family inet

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-udp-port 4001

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-udp-port 4001

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 test-iterator-duration 120

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 destination-ipv4-address 192.168.200.1

    set services rpm rfc2544-benchmarking tests test-name TESTE-1 source-ipv4-address 192.168.200.2

     

     

    But I can't find the commad to activate it.

    The commad test services rpm rfc2544-benchmarking test TESTE-1 start does not exsits on QFX and I can't finad any commnad to activate it.

     

    Does some know how to activate rfc2544 on QFX ?

     

       Thanks

     



  • 2.  RE: enabling rfc2544-benchmarking on QFX-5100
    Best Answer

    Posted 10-06-2019 16:20

    According to the Feature Explorer RFC 2544 tests are only supported on MX and ACX platforms.

     

    https://apps.juniper.net/feature-explorer/parent-feature-info.html?pFName=RFC%202544-based%20benchmarking%20tests%20for%20Layer%202%20and%20Layer%203%20Ethernet%20services

     



  • 3.  RE: enabling rfc2544-benchmarking on QFX-5100

    Posted 10-07-2019 04:39

    Thanks