Hello, I've been trying to poll jnxOperatingTemp on my EX2200C switches in SW, but I keep getting a "0" response. I did some research found some information that stated the EX2200C does not give that information. It was just in passing and have not completely been able to verify the info. I have done snmp mib walks in my switch and it does verify that all OIDS in relation to jnxOperatingTemp are showing a "0" value which means that it is unavailable or Inapplicable. However i read this article and it seemed to suggest there is a way to track temp via snmp via SNMP.
http://forums.juniper.net/t5/Ethernet-Switching/EX2200-C-Temperature-Sensors/m-p/243772#M10451 So I guess I'm just looking for a little clarification on the issue. Thanks in advance for the help.