Junos
Highlighted
Junos

mib value for MS-MIC memory values

‎06-14-2018 07:55 AM

Hello community,

 

I want to monitor the memory consumption in my ms-mic card in a MX-104 but our monitoring tool reports constanty 0% (cannot be right).

With my scarce knowlede of mibs, doing some reading found these ones but they don't give any output when issued in a snmpwalk. Do you know what i'm doing wrong?

run show snmp mib walk jnxContentsDescr.8.1.1.0
run show snmp mib walk jnxContentsDescr.20.1.1.0
run show snmp mib walk jnxContentsModel.8.1.1.0
run show snmp mib walk jnxContentsModel.20.1.1.0
run show snmp mib walk jnxFruName.8.1.1.0
run show snmp mib walk jnxFruName.20.1.1.0
run show snmp mib walk jnxOperatingDescr.8.1.1.0
run show snmp mib walk jnxOperatingDescr.20.1.1.0
run show snmp mib walk jnxFruName.8.1.1.0
run show snmp mib walk jnxFruName.20.1.1.0

 

Thanks in advance.

 

jaime

1 REPLY 1
Highlighted
Junos

Re: mib value for MS-MIC memory values

‎06-22-2018 12:10 PM

Hi ,

you can use below MIBs

 

show snmp mib walk ascii 1.3.6.1.4.1.2636.3.1.13.1.5     << description of FPC /PIC slot

show snmp mib walk ascii 1.3.6.1.4.1.2636.3.1.13.1.15   << memory

show snmp mib walk ascii 1.3.6.1.4.1.2636.3.32.1.2.1.5 << Svc set memory

 

[KUDOS PLEASE! If you think I earned it!

If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]

 

//Reagrs

AD

Feedback