Can anyone point me in the direction so that I can create a filter and use a time of day to enforce terms ?
Or should i be calling in and asking for a feature enhancment ?
Here are some dated things ive found and im at a stand still .
As the post mention this is limited to one time range..
Im thinking this slax script was not ment for EX platform. As I dont have any apply-macro plus it posts its for Junos 9.x
From the same link you posted, try and use apply-groups using when time... assuming that your time range is contiguous.
If im reading that correctly. One will need to create a new group and thus a new filter under that group for every time range they need to use .
That sound correct to you ?
If you have 2 separate time ranges you should be able to use 2 group configurations with 1 filter.
Thanks for the reply. Ive put in a feature request to have this pulled from the SRX branch to the EX to do schedulers..
The group stuff would be a bit much IMHO if you need to do adv things in multipule stanzas.
© 1999 - 2019 Juniper Networks, Inc.
All rights reserved