my first post, here because there is no snmp section on the forum :
my question :
I want to make a nagios check that make a warning if reserved bandwith is more than 50% of available bandwith.
on cli interface i can type the following command :
show rsvp interfaces
and got this (just an exemple).
RSVP interface: 4 active
Active Subscr- Static Available Reserved Highwater
Interface State resv iption BW BW BW mark
fe-0/0/0.0 Up 2 100% 155.52Mbps 155.52Mbps 50Mbps 0bps
fe-0/0/1.0 Up 0 100% 155.52Mbps 155.52Mbps 0bps 0bps
fe-1/0/1.0 Up 0 100% 155.52Mbps 155.52Mbps 0bps 0bps
I'm searching for the oid that can permit to retreive this informations.
before asking here I try some lots of snmpwalk, look at lot of mib (ex http
://www.juniper.net/techpubs/en_US/junos11.4/topics/reference/mibs/mib-jnx-rsvp.txt ) but without success
equipement : mx80 junos 11.4
Can someone tell me if there is an OID that contain this informations ?
if not why (because of my junos version ?, router hardware ? ) ?
what can i do to get this information ? ( I don't want to make a ssh connection and retreive the output of "show rsvp interfaces")