Juniper SRX 210H in a 2 node cluster. Both nodes are running firmware junos-srxsme-12.1X46-D40.2.
Getting the following error via SYSLOG from both nodes:
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
Both nodes did have a USB drive attached days ago but that drive is no longer attached and the error is still being thrown. The drive was umounted properly when removed. The USB drive was formatted NTFS.
Any ideas on how to clear this error?
JamesNT