Management
Highlighted
Management

Can't build LACP interface via Network director

‎06-26-2019 08:29 PM

Hi 

I have two switches forming Virtual Chassis. I would like to creat LACP to be a uplink from both of two switches. However, There's only show the interface of backup device.

 

Have you ever seen this problem?

Is it support on Network director

 

 

3 REPLIES 3
Management

Re: Can't build LACP interface via Network director

‎06-26-2019 11:41 PM

Hi,

Are you saying you dont see interfaces of master switch on Director ?

 

 

Management

Re: Can't build LACP interface via Network director

‎06-30-2019 06:51 PM
I can see interface of master switch except manage Lag page
Management

Re: Can't build LACP interface via Network director

‎07-01-2019 08:29 PM

Hi Halo,

 

From the "View" pane, select a switch for link aggregation. 


Note: The Manage LAG task is only available when a qualified switch is selected in the View pane.  

 

Please refer this: 

https://www.juniper.net/documentation/en_US/junos-space-apps/network-director3.2/topics/task/configu...

 

Please let us know if this worked.

 

Hope this helps.

Regards,
-r.

--------------------------------------------------

If this solves your problem, please mark this post as "Accepted Solution."
Kudos are always appreciated Smiley Happy.