Management
Management

Juniper Device - Hardening & Best Practices

01.12.12   |  
‎01-12-2012 03:50 AM

We have purchased a large amount of Juniper hardware for a project, namely EX switches, SRX routers, NSMXpress Series II, NSM Central manager and ISG firewalls.

 

I have been tasked with creating a best practice and hardening document for these devices and cannot find very much in searching the Juniper site or the web in general.

 

So I have to turn to experience and exposure of people who may have already done something similar r know the location of engineering level documents (how, why and fixes etc), which will allow me to provide a comprehensive template for all these devices.

 

Can anyone at Juniper or elsewhere advise if such documentation exists and for all of these devices?

 

Thanks & Regards

2 REPLIES
Management

Re: Juniper Device - Hardening & Best Practices

01.12.12   |  
‎01-12-2012 07:07 AM

There is a publication in the "Day One" series that address this topic.

 

This Week Hardening Junos Devices

 

http://forums.juniper.net/t5/Day-One-Books/This-Week-Hardening-Junos-Devices/ba-p/117366

Steve Puluka BSEET
Juniper Ambassador
Senior IP Engineer - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
JNCIA-Junos JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCIS-FWV
JNCDA JNCDS-DC JNCDS-SEC
JNCIS-SP
ACE PanOS 6 ACE PanOS 7
http://puluka.com/home
Management

Re: Juniper Device - Hardening & Best Practices

01.31.12   |  
‎01-31-2012 12:19 PM

You can also check out this if you're so inclined:

 

http://benchmarks.cisecurity.org/en-us/?route=downloads.show.single.junos.101

Juniper Elite Partner
JNCIE-ENT #63, JNCIE-SP #705, JNCIE-SEC #17, JNCIS-FWV, JNCIS-SSL