Management
Management

Junos Space security director monitor VPN only one tunnel is showing status JS version 17.2

‎05-11-2018 08:16 AM

I am havign an issue where I monitor 7 different VPN's under

Junos space > Security director> Monitor> VPN

 

When I look at the VPN overview only one of the tunnels is showing up it is a known tunnel that is down so the status is correct however the remaining 6 VPN tunnels are not reporting there tunnel status

 

SRX cluster firewall configuration

set system syslog host 10.253.227.11 any any
set system syslog host 10.253.227.11 port 514
set system syslog host 10.253.227.11 structured-data

 

log-collector status 

 

[root@LOG-COLLECTOR ~]# healthcheckOSLC
--Pre Checks in Progress--

Jingest network check OK
Jingest process is active
Elastic Search is Running
/usr/lib/python2.6/site-packages/elasticsearch/connection/http_urllib3.py:50: UserWarning: Connecting to 127.0.0.1 using SSL with verify_certs=False is insecure.
'Connecting to %s using SSL with verify_certs=False is insecure.' % host)
ES Cluster Health status - Green
ERROR: No Index found for current hour
ES server connectivity(root) - valid

Failure in Pre-checks, Do you still want to continue?[y/n]y

Performing OSLC health check

System health check in progress...
Jingest health check in progress...
Elasticsearch health check in progress...
/usr/lib/python2.6/site-packages/elasticsearch/connection/http_urllib3.py:50: UserWarning: Connecting to localhost using SSL with verify_certs=False is insecure.
'Connecting to %s using SSL with verify_certs=False is insecure.' % host)

Generating report ....

-----------
Overall Summary
-----------
System Health - WARNING
Jingest Health - WARNING
Elasticsearch Health - WARNING

Want to view detailed report? y/n y

System HEALTH
-------------

Host IP --> 10.253.227.11
Release Version --> VMware(R) Tools version 8.6.0
Total Memory(GB) --> 63.0
CPU Configured --> 4
Time Zone Configured --> UTC
Interface Card Installed --> 2
Check firewall status - ipv4 --> firewalls active
Check firewall status - ipv6 --> firewalls active
Check TCP Port 9200 --> Port 9200 OK.
Check TCP Port 9300 --> Not listening on Port 9300
Check TCP Port 514 --> Port 514 OK.
Check TCP Port 4514 --> Not listening on Port 4514

Jingest HEALTH
-------------

Host IP --> 10.253.227.11
Process Status --> running
Watchdog Status --> active
Process ID --> 1926
Process Running Time --> 16:46:38
Memory (MB) --> 2392
Memory allocated percent (%) --> 4.0
Syslog forward status --> disabled
Target ip configured --> 127.0.0.1
Live traffic on 514 port (jIngest) --> no traffic
Feed files check --> Device feed last updated at 1526044936.0
Thread Count Dump --> Count = 4
Buffer Size Dump --> 1000

Elasticsearch HEALTH
-------------

Host IP --> 10.253.227.11
Process Status --> running
Watchdog Status --> active
Process ID --> 1392
Process uptime --> 16:47:24
Memory (MB) --> 31
Memory allocated percent (%) --> 0.0
Whitelisted IP's in elasticsearch --> None
Disk roll over limit(GB) --> False
Number of data nodes --> 1
Cluster Status --> Status OK
Mapping Status --> mapping not applied
Current Index --> No indices for current timestamp
Red Indices on ES Server --> No Red Indices Found
Configuration (single or multi node) --> single node
Target Node --> collector-indexer
Firewall Status - ipv4 --> firewalls active
Firewall Status - ipv6 --> firewalls active
Traffic from Jingest to Elasticsearch --> no traffic
Configured active Nodes in Cluster --> ['10.253.227.11']
Node Configuration of 10.253.227.11 --> Master Node
Free physical memory : 30489 MB
Free Memory percent : 47 %
Used physical memory : 33938 MB
Used Memory percent : 53 %

Capturing tcpdump inprogress...
11-05-2018-15-03-28-syslog-capture.pcap Completed.
Check inside /opt/system-diagnostics/out/

Completed in 38.9077560902 seconds!

 

Juno Space > Security director > Administration > Logging management > status up application green