Management
Highlighted
Management

Junos security director resynchronise with device

‎06-18-2019 04:45 AM
Hi,

Got about 10 SRX devices managed by security director ... every so often I have to manually resynchronise with the device before I can push out a policy.

There are firewalls in the way of this communication ... does anyone know what protocol keeps the server and devices in sync? Thinking I may be missing a TCP port etc
3 REPLIES 3
Management

Re: Junos security director resynchronise with device

‎06-18-2019 05:37 AM
Please check if auto-resync is enabled from Platform - Admin - application NMP Setting.

Regards,
Pravin
Management
Solution
Accepted by topic author oban3jimmy
‎06-23-2019 08:27 AM

Re: Junos security director resynchronise with device

‎06-18-2019 03:44 PM

Pretty sure Space uses netconf over ssh which uses tcp port 830 for the connections.

 

I also remember space putting a config for the devices to push changes from the device into space.  If so, you can see it under the system hierarchy.  If this is there your need the port open from the device to the space appliance too.

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Management

Re: Junos security director resynchronise with device

‎06-23-2019 08:27 AM
Perfect - thanks