Management
Highlighted
Management

NSM High Availability

‎03-16-2009 07:07 AM
Is there a specific license needed to run two NSM servers in HA mode?
Gr33n Data
JNCIS-FWV, JNCIA-IDP

@gr33ndata

http://gr33ndata.blogspot.com/
2 REPLIES 2
Highlighted
Management

Re: NSM High Availability

‎03-16-2009 08:03 AM

You will need a HA license to run the servers in HA mode.

 

When generating the license, you will need the Install ID from both the servers & select HA when creating the license.

 

Thanks,
Chandra

Highlighted
Management

Re: NSM High Availability

‎04-19-2009 09:01 AM

Hi  Gr33

 

this is  paragraph on chapiter2 NSM2008.1_Install_guide : Generating the NSM License Key File,

 

you don't need to use licensing  for set HA server Mode if you use base line lisence you can manage 25 device but for manage more  devicce the license must be purshased

*********

In Release 2007.3 and later releases, the NSM product line uses a licensing mechanism
to prevent access to an unlicensed copy of NSM and to enforce a limit on the
maximum number of devices that can be managed by NSM. New installations and
installations upgrading from a release prior to 2007.3 must obtain a license to use
NSM.
The base license supports 25 devices with high availability (HA), including devices
running ScreenOS, IDP, or JUNOS software with Enhanced Services, or EX-series,
Secure Access, or Infranet Controller devices, and including any modeled or vsys
devices. For details on these devices, see the Network and Security Manager
Administration Guide.
To manage more than 25 devices, a license key must be purchased separately,
retrieved from the Juniper License Management Server (LMS), and then installed
onto the NSM Server or NSMXpress.
LMS provides an interface to generate licenses based upon serial number,
authorization code and installation ID

**********************

 

hope i help you 

thnks 

**If this reply solved your problem click on Kudos **
Kind Regard
http://www.linkedin.com/in/mkhitmane
personal mail: mehdi.khitmane@gmail.com