Network Management
Network Management

After a vMotion, why are the changes not visible in Network Director?

by Juniper Employee on ‎02-28-2016 10:36 PM - edited on ‎07-31-2017 10:35 PM by Juniper Employee (1,674 Views)

Question

After a vMotion, why are the changes not visible in Network Director?

Answer

After each successful vMotion, Network Director initiates an orchestration in your virtual network. Network Director tracks the status of orchestration by using an orchestration job. After the orchestration job is completed successfully, you must manually resynchronize the physical switch’s configuration with Network Director.

 

If the system of record (SOR) mode set for the Junos Space Network Management Platform is:

 

  • Network as system of record (NSOR), then performing a resynchronization ensures that Junos Space automatically resynchronizes its configuration record to match the device configuration and sets the device configuration state to In Sync when the resynchronization completes.
  • Junos Space as system of record (SSOR), then you must perform a resynchronization and accept the out-of-band changes. Both the Junos Space configuration record and the Network Director Build mode configuration are resynchronized to reflect the out-of-band configuration changes.

You can learn more about resynchronizing device configuration in Network Director from the Network Director user documentation or online Help.