Network OS
Network OS
Browse by Content Type:

Expert Advice

How-To

All Articles
Network_OS | Feb 2, 2016
In my system, the MIB object snmpEngineBoots is not in sync between two Routing Engines in a dual Routing Engine device. Is this normal behavior?
Message contains a hyperlink Image URL
1
774
Network_OS | Feb 2, 2016
Is there a way to identify that an address belongs to RE0, RE1, or the master Routing Engine management interface (fxp0) by looking at an SNMP walk?
Message contains a hyperlink Image URL
1
724
Network_OS | Feb 2, 2016
What is the best way to determine if the current IP address belongs to fxp0 or a Routing Engine, from a CLI session?
Message contains a hyperlink Image URL
1
867
Network_OS | Feb 2, 2016
When there is a failover, the master hostname is changed since the hostname belongs to the Routing Engine. Is this correct?
Message contains a hyperlink Image URL
1
767
Network_OS | Feb 1, 2016
FAQ: SNMP Traps and Informs
Message contains a hyperlink Image URL
1
961
Network_OS | Feb 1, 2016
Does Junos OS impose any rate limiting on SNMP trap generation?
Message contains a hyperlink Image URL
1
919
Network_OS | Feb 1, 2016
Can I set up filters for traps or informs?
Message contains a hyperlink Image URL
1
923
Network_OS | Feb 1, 2016
Can I simulate traps on a device?
Message contains a hyperlink Image URL
1
1
772
Network_OS | Feb 1, 2016
How do I generate a warm start SNMPv1 trap?
Message contains a hyperlink Image URL
1
976
Network_OS | Feb 1, 2016
The NMS sees only the MIB OIDs and numbers, but not the names of the SNMP traps. Why?
Message contains a hyperlink Image URL
1
774