Routing
Highlighted
Routing

ACX 5k Unable to login on Root Maintenance

‎04-27-2017 04:06 PM

Hello guys! 

  I have a question about a error occuring on a ACX 5k. After a error on the disk. I'm unable to login on the root account to perform a recovery. Is there a way to recovery Root acess like in Junos? 

This is the message:

*** An error occurred during the file system check.
*** Dropping you to a shell; tyou leave the shell.
Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
Give root password for maintenance
(or type Control-D to continue):

After this error this whole thing occurs:

ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: irq_stat 0x40000001
ata5.00: failed command: WRITE DMA
ata5.00: cmd ca/00:08:01:00:00/00:00:00:00:00/e0 tag 0 dma 4096 out
res 51/04:08:01:00:00/00:00:00:00:00/e0 Emask 0x1 (device ERR }

2 REPLIES 2
Highlighted
Routing

Re: ACX 5k Unable to login on Root Maintenance

‎04-29-2017 03:44 AM

This is the root password recovery option

 

http://www.juniper.net/techpubs/en_US/junos/topics/task/configuration/authentication-root-password-r...

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
Routing

Re: ACX 5k Unable to login on Root Maintenance

‎04-30-2017 07:37 PM

Hi Folks,

 

This a single point reference for password recovery many Juniper Networks products

 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB12167&actp=METADATA

 

-Python JNCIE 3X [SP|DC|ENT] JNCIP-SEC JNCDS 3X [ WAN | DC|SEC] JNCIS-Cloud JNCIS-DevOps CCIP ITIL
#Please mark my solution as accepted if it helped, Kudos are appreciated as well.
Feedback