Routing
Highlighted
Routing

Bridge-domain within an VPLS instance for untag traffic

[ Edited ]
‎09-29-2014 02:57 AM

Dear great support !

 

I need to configure one VPLS instance that can carry both untagged and tagged frame with a different bridge-domain for each vlan and one bridge-domain for the untagged traffic as well. I managed to build this configuration on an VRF instance-type of VPLS.

 

Next step is to provide an L3 interface for each PE for each domain-bridge. So I had to switch to an instance-type of virtual-swith with one bridge-domain and one IRB interface for each vlan. It works fine except for the untagged traffic : end-to-end customer is not working for untagged frame, so for the irb as well....

 

I did add "vlan-none" to bridge-domain but it didn't help....

 

So to resume the situation : it is possible to signal in VPLS, on an instance-type of virtual-swithch, a bridge-domain with untagged frame ? How ?

 

 

 

Device : MX240, JunOS 14.1

 

Thanks for your help

 

Salah

JNCIE-SP 2094

JNCIE-ENT 473

 

Feedback