Routing
Highlighted
Routing

Can't see all bgp route

‎01-10-2017 10:09 AM

Hello,

 

i can't recieve all 6 route from all router R1 to R7 on Router R2. Router R1 and R3 on confedration number 65000, R2 and R4 in Confederation number 65001 and R5,R6, R7 in Confederation 65002. 

 

R3,R4,R5 are configured as C-BGP

 

root@R5# run show bgp summary    
Groups: 2 Peers: 4 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0               
                      10          6          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.0.3.3              65000      13839         27       0       0        8:00 4/4/4/0              0/0/0/0
10.0.3.4              65001      12472         16       0       1        3:27 0/4/4/0              0/0/0/0
10.0.9.6              65002       2830       2827       0       1    21:17:09 1/1/1/0              0/0/0/0
10.0.9.7              65002       2830       2825       0       1    21:17:06 1/1/1/0              0/0/0/0

[edit]
root@R5# show protocols bgp 
group 65002 {
    type internal;
    local-address 10.0.3.5;
    export ibgp;
    neighbor 10.0.9.6;
    neighbor 10.0.9.7;
}
group c-bgp {
    type external;
    multihop;
    local-address 10.0.3.5;
    export ibgp;
    neighbor 10.0.3.3 {
        peer-as 65000;
    }
    neighbor 10.0.3.4 {
        peer-as 65001;
    }
}

[edit]
root@R5# show routing-options 
static {
    route 192.168.50.0/24 reject;
}
autonomous-system 65002;
confederation 65412 members [ 65000 65001 65002 ];

[edit]
root@R5# run show route protocol bgp 192/8|count |match 192.168 
Count: 6 lines
root@R2# show routing-options 
static {
    route 192.168.20.0/24 reject;
}
autonomous-system 65001;
confederation 65412 members [ 65000 65001 65002 ];

[edit]
root@R2# show prp 
              ^
syntax error.
root@R2# run show bgp summary          
Groups: 1 Peers: 1 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0               
                       6          4          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.0.3.4              65001     154381       2879       0       1    21:34:06 4/6/6/0              0/0/0/0

[edit]
root@R2# run show route protocol bgp 192/8|count |match 192.168 
Count: 4 lines

[edit]
root@R2# show protocols bgp 
group 65001 {
    type internal;
    local-address 10.0.6.2;
    export ibgp;
    neighbor 10.0.3.4;
}
root@R4# run show bgp summary 
Groups: 2 Peers: 3 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0               
                       8          6          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.0.3.3              65000      66633      67080       0       0       20:16 2/2/2/0              0/0/0/0
10.0.3.5              65002         52      66632       0       0       20:20 3/5/5/0              0/0/0/0
10.0.6.2              65001       2879     155073       0       1    21:34:15 1/1/1/0              0/0/0/0

[edit]
root@R4# run show pro
                     ^
syntax error.
root@R4# show prp       
              ^
syntax error.
root@R4# show protocols bgp     
group 65001 {
    type internal;
    local-address 10.0.3.4;
    export ibgp;
    neighbor 10.0.6.2;
}
group c-bgp {
    type external;
    multihop;
    local-address 10.0.3.4;
    export ibgp;
    neighbor 10.0.3.5 {
        peer-as 65002;
    }
    neighbor 10.0.3.3 {
        peer-as 65000;
    }
}

[edit]
root@R4# show routing-options 
static {
    route 192.168.40.0/24 reject;
    route 200.200.0.1/32 next-hop [ 172.16.0.6 172.16.0.10 ];
}
aggregate {
    route 10.0.4.0/22;
}
autonomous-system 65001;
confederation 65412 members [ 65000 65001 65002 ];

[edit]
root@R4# run show route protocol bgp 192/8|count |match 192.168 
Count: 6 lines

 

Thanks,

Jay

 

 

4 REPLIES 4
Highlighted
Routing

Re: Can't see all bgp route

‎01-10-2017 01:04 PM

Hello there,

Believe me or not but You are in fact receiving all 6 routes on R2:

 

root@R2# run show bgp summary          
Groups: 1 Peers: 1 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0               
                       6          4          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.0.3.4              65001     154381       2879       0       1    21:34:06 4/6/6/0  

Only 4 out of 6 are "active" meaning only 4 make it to the route table. That's why You get only 4 lines when trying to count "192.168" routes on R4

2 out of total 6 are likely hidden - check "show route hidden detail" and verify if the protocol next-hops for these 2 are resolvable. Confederation members should be in common IGP domain.

HTH

Thx
Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Highlighted
Routing

Re: Can't see all bgp route

‎01-10-2017 02:02 PM

Thanks for the quick reply!

 

R2 is configured as level 1 and R2 facing interface of R4 configured as level 1 ISIS. R4's lo0 is in level 2. Does that can casue this issue ?

 

root@R2# show protocols isis 
export direct;
ignore-attached-bit;
level 2 disable;
level 1 wide-metrics-only;
interface all;

root@R4# show protocols isis 
export [ leak summ ];
level 2 wide-metrics-only;
interface ge-0/0/1.0 {    <<<<<<<R2 facing interface
    level 2 disable;
}
interface ge-0/0/2.0 {
    level 1 disable;
}
interface ge-0/0/3.0 {
    level 1 disable;
}
interface lo0.0 {
    level 1 disable;
}

 

On R5 there is 4 route is inactive, which is received from R4. 

 

root@R5# run show bgp summary    
Groups: 2 Peers: 4 Down peers: 0
Table          Tot Paths  Act Paths Suppressed    History Damp State    Pending
inet.0               
                      10          6          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.0.3.3              65000     158853        565       0       0     4:13:13 4/4/4/0              0/0/0/0
10.0.3.4              65001     148093        555       0       1     4:08:40 0/4/4/0              0/0/0/0
10.0.9.6              65002       3373       3365       0       1  1d 1:22:22 1/1/1/0              0/0/0/0
10.0.9.7              65002       3372       3364       0       1  1d 1:22:19 1/1/1/0              0/0/0/0

How can i resove next-hop on R2 to get route active ?

 

Thanks,

Jay

Highlighted
Routing
Solution
Accepted by topic author Jay040
‎01-11-2017 09:19 AM

Re: Can't see all bgp route

‎01-10-2017 10:48 PM

Hello,

Remove this line from R2 config and You should be golden:

 

root@R2# show protocols isis 

ignore-attached-bit;

HTH

Thx
Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Highlighted
Routing

Re: Can't see all bgp route

‎01-11-2017 08:51 AM

That's worked. 

Sorry, for this easy question. I just not much familar about ISIS thing.

 

Thanks a lot for your help. 

 

Thanks,

Jay

Feedback