Cisco to Juniper Frame Relay Configuration

‎10-25-2018 12:00 PM

Hello, I'm having some trouble migrating a frame relay circuit from Cisco to Juniper platform and was wondering if anyone had any advice?  We haven't had any issues while running on Cisco gear, so my thought is that my configuration is the problem.  I'm seeing physical link is coming up, but not able to ping the PE router.  I'm really struggling with this so any help is greatly appreciated.


Equipment SRX320 with T1E1 mPIM (RoHS)

Junos: 15.1X49-D120.3



Juniper Config:

e1-2/0/0 (This interface is part of an appropriate security zone to allow the traffic)
clocking external;
encapsulation frame-relay;
lmi {
lmi-type ansi;
e1-options {
timeslots 1-31;
framing g704-no-crc4;
unit 0 {
description "XXXXX";
dlci 100;
family inet {
address XXXX/30;


Cisco Config:


card type e1 0 0


controller E1 0/0/0
framing NO-CRC4
channel-group 0 timeslots 1-31

interface Serial0/0/0:0
no ip address
ip flow ingress
encapsulation frame-relay IETF
no fair-queue
frame-relay traffic-shaping
interface Serial0/0/0:0.100 point-to-point
ip address X.X.X.X
ip flow monitor XXXXX input
ip flow monitor XXXXX output
ip flow ingress
frame-relay class shaper-2mb
frame-relay interface-dlci 100 IETF