Hi,
I believe you need to include em0 under RSVP and MPLS.
Since you have not enabled CSPF and don't have defined ERO path, the LSP tries hop-by-hop based on IGP path.
For the 192.168.32.1, the OSPF points to em0 as your egress interface
KRT in-kernel 192.168.32.1/32 -> {10.0.1.5}
*OSPF Preference: 10
Next hop type: Router, Next hop index: 464
Next-hop reference count: 8
Next hop: 10.0.1.5 via em0.0, selected
State: <Active Int>
Age: 10:10 Metric: 1
Area: 0.0.0.0
Task: OSPFv2
Announcement bits (1): 0-KRT
AS path: I
and since this interface is not enabled with RSVP and MPLS, the LSP doesn't come Up.
George@Sherry> show rsvp interface
RSVP interface: 2 active
Active Subscr- Static Available Reserved Highwater
Interface State resv iption BW BW BW mark
em1.0 Up 0 100% 1000Mbps 1000Mbps 0bps 0bps
em3.0 Up 0 100% 1000Mbps 1000Mbps 0bps 24Mbps
George@Sherry> show mpls interface
Interface State Administrative groups
em1.0 Up <none>
em3.0 Up <none>
I hope when you tried with strict ERO path, it would have been a either through em1 or em3.
Regards
Surya Prakash