Routing
Highlighted
Routing

H-VPLS Juniper and Cisco interoperability

‎01-31-2011 02:30 AM

I am trying to configure the H-VPLS network with Juniper MX as a hub and Cisco 6524 as a spoke,

but the VC connection goes into CM -- control-word mismatch state.

 

Juniper VPLS routing-instance configuration

 

HVPLS_TEST {
    instance-type vpls;
    vlan-id none;
    interface ge-5/1/9.555;
    protocols {
        vpls             
            no-tunnel-services;
            ignore-encapsulation-mismatch;
            mesh-group GROUP1 {
                vpls-id 555;
                local-switching;
                neighbor 10.10.10.10 {
                    encapsulation-type ethernet-vlan;
                }
            }
        }
    }
}

 

and Cisco spoke configuration

 

interface GigabitEthernet1/2.555
  encapsulation dot1Q 555 
  xconnect 1.1.1.1 100 encapsulation mpls

 

 

1 REPLY 1
Highlighted
Routing

Re: H-VPLS Juniper and Cisco interoperability

‎12-26-2017 09:51 AM

Change VCID on the cisco to 555