Routing
Highlighted
Routing

How to configure ospf over ipsec correctly ?

‎05-12-2015 06:00 AM

Hello!  what is the best way to configure ospf over ipsec ?

I have three srx. Each SRX has some subnets bisides itself. My purpose is share(exchange) this subnets between all SRX  over IPSEC VPN. ( Redundancy must be ).

 

 

In the context of such topology:

 

psec vpn full mesh.png

3 REPLIES 3
Highlighted
Routing
Solution
Accepted by topic author vlazarev
‎08-26-2015 01:27 AM

Re: How to configure ospf over ipsec correctly ?

‎05-12-2015 06:11 AM

I was working on a similar setup last week. You may follow the attached config.

 

 

 

 

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too

Attachments

Highlighted
Routing

Re: How to configure ospf over ipsec correctly ?

[ Edited ]
‎05-12-2015 06:20 AM

Hello, Rsuraj! So, you offer ,

 1. all st0.0 from each SRX will be in the same subnet . ( for example 10.10.10.0/28);

 2. Configure hub-and-spoke three times ( SRX1 ----> SRX2,SRX3  , SRX2-->SRX1,SRX3 , SRX3-->SRX1,SRX2) ??

Highlighted
Routing

Re: How to configure ospf over ipsec correctly ?

‎05-12-2015 07:04 AM
Thats correct
Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
Feedback