Routing
Routing

LACP messages - log is full in MX104

‎10-14-2019 02:49 AM

Hi, everybody!

I have 2 routers:

mx104, 16.1R3.10 and mx480, 16.1R5.7

between of them i have LACP

And i have full log messageson mx104:

vitas@agr1.ekt10> show log messages | last 10
Oct 14 14:32:40.662 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-2/0/2 wt 1, cd_to_attached 0
Oct 14 14:32:40.662 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-1/2/0 wt 1, cd_to_attached 0
Oct 14 14:32:40.662 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-1/2/0 wt 1, cd_to_attached 0
Oct 14 14:32:40.662 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-2/0/2 wt 1, cd_to_attached 0
Oct 14 14:33:10.656 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-2/0/2 wt 1, cd_to_attached 0
Oct 14 14:33:10.656 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-1/2/0 wt 1, cd_to_attached 0
Oct 14 14:33:10.656 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-2/0/2 wt 1, cd_to_attached 0
Oct 14 14:33:10.658 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-1/2/0 wt 1, cd_to_attached 0
Oct 14 14:33:10.658 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-1/2/0 wt 1, cd_to_attached 0
Oct 14 14:33:10.658 2019 agr1.ekt10 /kernel: LACP: Preference:1, cont ifd xe-2/0/2 wt 1, cd_to_attached 0

This interfaces included in LACP. 

It does not affect traffic. But log is full. It is't normal. I looked for about this but not found.

May be someone know about this?

2 REPLIES 2
Routing

Re: LACP messages - log is full in MX104

‎10-14-2019 07:00 AM

Hi,

These are harmless and cosmetic messages. Do you have "any any" enabled for the messages file?

From 16.1R5 onwards these messages will be seen only when traceoptions are enabled.

So you can either go to that junos or you can filter these logs and ignore them from logging in messages file. Below KB provides steps on how to do that - 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB22177

Thanks

Mayank Shah

 

** Please mark as solution if this resolves your issue so others can benefit from the post.

Routing
Solution
Accepted by topic author belovvictor1981@icloud.com
‎10-15-2019 01:23 AM

Re: LACP messages - log is full in MX104

‎10-15-2019 01:22 AM

Thank you, it works!