Trying to get the LNS configured, but struggling a little, due to unforeseen glitches, as per below:
I am currently following the following documentation: https://www.juniper.net/documentation/en_US/junos/topics/example/subscriber-management-l2tp-lns.html and am changing the various sections to suit our requirements, but have come across another issue at the section:
9: Configure a dynamic profile that dynamically creates L2TP logical interfaces for dual-stack subscribers:
The following command is missing: edit routing-options access route $junos-framed-route-ip-address-prefix
According to Juniper Notes, the reason is listed at: https://kb.juniper.net/InfoCenter/index?page=content&id=KB31778&actp=METADATA
But, then the workaround fails at the following point:
routing-instances {
"$junos-routing-instance" {
interface "$junos-interface-name";
routing-options {
rib "$junos-ipv6-rib"
The $junos-ipv6-rib statement just does not exist. Now, I know this is calling the Routing Information Base but junos specifies it within the statement, we don’t have that. It is getting rather annoying now as I cannot complete the LNS configs and we need them tested urgently.
Any help here would be great.