Hello team:
I am new to logical systems on JUNOS. I need help ´cause I do not see the interfaces I just configured on them...
Basically, I edited one logical system called R1 on my M7i, and added two logical units of one GE interface...
set logical-systems R4 interfaces fe-0/2/0 unit 30 vlan-id 30
set logical-systems R4 interfaces fe-0/2/0 unit 30 family inet address 10.10.34.4/24
set logical-systems R4 interfaces fe-0/2/0 unit 30 family mpls
set logical-systems R4 interfaces fe-0/2/0 unit 40 vlan-id 40
set logical-systems R4 interfaces fe-0/2/0 unit 40 family inet address 10.10.14.4/24
set logical-systems R4 interfaces fe-0/2/0 unit 40 family mpls
set logical-systems R4 interfaces lo0 unit 40 family inet address 10.1.4.1/32
I commited successfully, but when I execute the "show interfaces terse" or "show interfaces routing logical-system R4", nothing happens:
root@R2-M7i# run show interfaces routing logical-system R4
Interface State Addresses
[edit logical-systems R4]
root@R2-M7i# run show interfaces terse
Interface Admin Link Proto Local Remote
...
fe-0/2/0 up up
fe-0/2/1 up up
fe-0/2/2 up up
...
¿ Am I missing something?
Your help will be greatly appreciated
Rogelio Alvez
Argentina