Routing
Highlighted
Routing

MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

[ Edited ]
‎12-08-2018 11:41 PM

Hello Team,

 

as a partner , we need some clarity on Juniper MX960 platform .

 

Does Juniper MX960 support Flow based QOS, specifucally user based Rate-limiting or not . ?

USE CASE-  Internet SP BNG

We know that it supports DPI, Rate-limit (based on a percentage of physical port speed on an interface)

and can do Application Aware QoS – but it requires the MS-MPC

 https://www.juniper.net/assets/us/en/local/pdf/datasheets/1000498-en.pdf

 

But do MX960 really supports flow based QOS specifucally user based Rate-limiting or not . ? 

 

We would really appreciate your quick response . Thanks in advance

3 REPLIES 3
Routing
Solution
Accepted by topic author amarprsi
‎12-10-2018 06:22 AM

Re: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

‎12-09-2018 04:45 AM

Hello,

You can assign an input/output filter with policer via dynamic-profile if that's Your question.

You can find several config examples on this forum.

Such as this one for PPP subs https://forums.juniper.net/t5/Routing/Controlling-PPP-Users/m-p/314981

HTH

Thx

Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Routing

Re: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

‎12-10-2018 06:21 AM

Hi aarseniev, 

 

Thank for quick update, this is realy helpful insights . 

 

Do you know if it requires the MS-MPC for this ? We would appreciate your quick response .

Routing

Re: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

‎12-10-2018 10:04 AM

Hello,

No, MS-MPC is not required for regular BNG/BRAS/LNS functionality including filters with policers.

MS-MPC is required for advanced functionality such as CGNAT, Jflow v9 (albeit Jflowv9 can be done in regular MPC as well), DPI, server load-balancer/TLD, HTTP Header enrichment, and the like.

HTH

Thx
Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !