as a partner , we need some clarity on Juniper MX960 platform .
Does Juniper MX960 support Flow based QOS, specifucally user based Rate-limiting or not . ?
USE CASE- Internet SP BNG
We know that it supports DPI, Rate-limit (based on a percentage of physical port speed on an interface)
and can do Application Aware QoS – but it requires the MS-MPC
But do MX960 really supports flow based QOS specifucally user based Rate-limiting or not . ?
We would really appreciate your quick response . Thanks in advance
Go to Solution.
You can assign an input/output filter with policer via dynamic-profile if that's Your question.
You can find several config examples on this forum.
Such as this one for PPP subs https://forums.juniper.net/t5/Routing/Controlling-PPP-Users/m-p/314981
Thank for quick update, this is realy helpful insights .
Do you know if it requires the MS-MPC for this ? We would appreciate your quick response .
No, MS-MPC is not required for regular BNG/BRAS/LNS functionality including filters with policers.
MS-MPC is required for advanced functionality such as CGNAT, Jflow v9 (albeit Jflowv9 can be done in regular MPC as well), DPI, server load-balancer/TLD, HTTP Header enrichment, and the like.