May i know the "agentd" process stand for what proceed? Is there any impact if i kill this "agentd" process?
show system processes extensive last pid: 28190; load averages: 1.07, 1.11, 1.04 up 490+12:15:56 15:44:12144 processes: 5 running, 118 sleeping, 21 waiting
Mem: 726M Active, 160M Inact, 304M Wired, 150M Cache, 112M Buf, 2530M FreeSwap: 1025M Total, 1025M Free
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND1506 root 1 132 0 12320K 4432K RUN 6186.8 89.26% agentd28181 root 1 98 0 7228K 3468K select 0:00 0.33% sshd
Thanks and appreciate any feedback
agentd is related to telemetry , you can kill this process without any impact on traffic, but better option will open case to jtac
If you are not using JVSISION or Telemetry are are still seeing this agentd consuming high CPU cycles , you might have to use these commands to fix it .
As a workaround, configure "set system processes SDN-Telemetry disable" and "deactivate groups junos-defaults routing-options enable-sensors" if telemetry is indeed not needed/configured.
PR says that its cosmetic but we have seen that CPU being spiked due to this.
It's look like the url that i given cannot be open.
Try this https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1248813
Kudos are highly appreciated.
Please Mark solution as accepted and hit Kudos if you like the solution.
Do let us know if the workaround helped.
If this didnt fix it then you might have to open a JTAC case in order to unerstand why agentD is utilizing CPU cycles.
© 1999 - 2019 Juniper Networks, Inc.
All rights reserved