Routing
Routing

RIP or OSPF between Cisco 7206 and Juniper J4350 Routers

07.14.10   |  
‎07-14-2010 11:34 AM

Good morning.

 

We are trying to setup a simple dynamic network between a Cisco Router (C7206) and a Juniper Router (J4350)

There is what seems to be a lack of coherent documentation for the matching configurations required to get either RIPv2 or OSPF working between these devices.

 

We are using JUNOS 10.0R1 on the J4350.

 

The goal is to accept all advertised routes from the Cisco to the Juniper and only advertise a few routes from the Juniper to the Cisco.

Has anyone done this and can provide a quick and dirty config example.  We are open to either OSPF or RIP.

2 REPLIES
Routing

Re: RIP or OSPF between Cisco 7206 and Juniper J4350 Routers

07.15.10   |  
‎07-15-2010 02:47 AM

Hello,

A coherent documentation exists, just not on JNPR or CSCO websites

Try this book for Cisco-Juniper OSPF|RIP|ISIS|BGP interop examples/configs and also routing policy examples

http://www.amazon.com/Juniper-Cisco-Routing-Protocols-Multivendor/dp/0471215929

HTH

Regards

Alex

_____________________________________________________________________

Please ask Your Juniper account team about Juniper Professional Services offerings.
Juniper PS can design, test & build the network/part of the network as per Your requirements

+++++++++++++++++++++++++++++++++++++++++++++

Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
Routing

Re: RIP or OSPF between Cisco 7206 and Juniper J4350 Routers

02.07.12   |  
‎02-07-2012 04:13 AM
Hi all,

Any other links to share on the rip settings between juniper and cisco?
Thanks!

Michael
JNCIA-JUNOS, JNCIS-ENT/SEC, JNCIP-ENT
(CCNA, ACMP, ACFE, CISE)
"http://www.thechampioncommunity.com/"
CONNECT EVERYTHING. EMPOWER EVERYONE.
Share & Learn. Knowledge is Power.

"If there's a will, there's a way!"