I am simply trying to exchange OSPF routers between a cisco and a Juniper SRX.
I am sure i am missing something small, i am very new to Junos, any help is much appreciated
s24-admin# run show interfaces terse | match inet
ge-0/0/0.0 up up inet 10.211.56.16/24
ge-0/0/1.200 up up inet 10.10.2.2/24
ge-0/0/3.0 up up inet 10.7.7.1/24
lo0.99 up up inet 126.96.36.199/24
lo0.100 up up inet 10.8.8.1/24
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 10.0.0.1 --> 0/0
s24-admin# show routing-instances
route 10.10.5.0/24 next-hop 10.7.7.2;
You have to accept ospf on interface or zone level in secuirty stanza on srx.
set security zones security-zone [name] hostinbound traffic protocol ospf (or something like this). Did you do that? It's not in your shown config.