Hi All,
Firstly apologies if this is in the wrong category - was unsure whether to class this as routing or ethernet switching
I have got a VPLS connection in place across our network and I can ping the CE devices across it however I am unable to establish VRRP.
The solution goes: CE0---SW---PE0---P---PE1---SW---CE1
CE0&CE1 = SRX300
PE0 = ACX5048
PE1 = SRX340 Packet based mode
SW = Cisco Catalysts
From CE0 GW I can ping CE1 GW and vice versa - see bellow:
CE0 = 10.51.0.2
CE1 = 10.51.0.3
CE0 --> CE1
netadmin@core.srx01.thn ping 10.51.0.3 source 10.51.0.2
PING 10.51.0.3 (10.51.0.3): 56 data bytes
64 bytes from 10.51.0.3: icmp_seq=0 ttl=64 time=17.830 ms
64 bytes from 10.51.0.3: icmp_seq=1 ttl=64 time=2.689 ms
64 bytes from 10.51.0.3: icmp_seq=2 ttl=64 time=17.403 ms
64 bytes from 10.51.0.3: icmp_seq=3 ttl=64 time=14.521 ms
CE1 --> CE0
netadmin@core.srx02.en1> ping 10.51.0.2 source 10.51.0.3
PING 10.51.0.2 (10.51.0.2): 56 data bytes
64 bytes from 10.51.0.2: icmp_seq=0 ttl=64 time=67.586 ms
64 bytes from 10.51.0.2: icmp_seq=1 ttl=64 time=2.712 ms
64 bytes from 10.51.0.2: icmp_seq=2 ttl=64 time=2.565 ms
64 bytes from 10.51.0.2: icmp_seq=3 ttl=64 time=2.675 ms
64 bytes from 10.51.0.2: icmp_seq=4 ttl=64 time=2.598 ms
CE0 Config:
ge-0/0/6 {
description "INFRA: core.c3750g.thn ge-1/0/26 TRUNK PORT";
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 600 {
vlan-id 600;
family inet {
address 10.51.0.2/24 {
vrrp-group 1 {
virtual-address 10.51.0.1;
priority 90;
preempt;
}
}
}
}
CE1 Config:
ge-0/0/6 {
description "INFRA: core.c3750g.en1 ge-1/0/26 TRUNK PORT";
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 600 {
vlan-id 600;
family inet {
address 10.51.0.3/24 {
vrrp-group 1 {
virtual-address 10.51.0.1;
preempt;
}
}
}
}
PE0 Config:
ge-0/0/6 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 600 {
encapsulation vlan-vpls;
vlan-id 600;
family vpls;
}
}
vucp_vpls {
instance-type vpls;
vlan-id all;
interface ge-0/0/6.600;
route-distinguisher 91.109.40.246:1;
vrf-target target:59402:20000;
protocols {
vpls {
site-range 10;
no-tunnel-services;
site pe-r-00.en1 {
site-identifier 1;
}
}
}
}
PE1 Config - I am aware of the unsupported statement warning
ge-0/0/25 {
vlan-tagging;
encapsulation flexible-ethernet-services;
unit 600 {
encapsulation vlan-vpls;
vlan-id 600;
family vpls;
}
}
vucp_vpls {
description "VPLS for server LAN redudnacy";
instance-type vpls;
##
## Warning: statement ignored: unsupported platform (acx5048)
##
vlan-id all;
interface ge-0/0/25.600;
route-distinguisher 91.109.40.245:1;
vrf-target target:59402:20000;
protocols {
vpls {
site-range 10;
no-tunnel-services;
site pe-r-01.thn {
site-identifier 2;
}
}
}
}
Could anyone advise on what troubleshooting steps I should follow to resolve the VRRP not establishing?
If any more info is required please let me know, your help is greatly apprecaitaed
Kind Regards,
Alex Watson