Routing
Highlighted
Routing

error message after typing "commit check" in MX

‎11-16-2016 04:46 PM

Hi After typing command "commit check" i got the below error message. and the bottom are its config. Anyone can explain it? Thank you

 

AC0# commit check
re0:
[edit routing-instances WSN]
'protocols'
Protocol bgp not allowed under non-forwarding (0x8) instance WN
error: configuration check-out failed

{master}[edit]

 

set routing-instances WN protocols bgp group VV6 type external
set routing-instances WN protocols bgp group VV6 neighbor 2081:4828:f08f:482:f80:11:0:2 description "eBGP peer NY IPV6"
set routing-instances WN protocols bgp group VV6 local-address 2081:4828:f08f:482:f80:11:0:1
set routing-instances WN protocols bgp group VV6 import RG_IMPORT_POLICY_VCE_V6
set routing-instances WN protocols bgp group VV6 family inet6 unicast
set routing-instances WN protocols bgp group VV6 export RG_EXPORT_POLICY_VCE_V6
set routing-instances WN protocols bgp group VV6 remove-private
set routing-instances WN protocols bgp group VV6 peer-as 255
set routing-instances WN interface ge-1/0/1.6

2 REPLIES 2
Highlighted
Routing
Solution
Accepted by topic author eesunj
‎11-16-2016 05:59 PM

Re: error message after typing "commit check" in MX

‎11-16-2016 04:53 PM

Hi eesunj,

 

Please try "instance-type virtual-router" instead of "instance-type forwarding" to be able to support routing protocols.

Then the commit should work.

Shailesh
[KUDOS PLEASE! If you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Highlighted
Routing

Re: error message after typing "commit check" in MX

‎11-17-2016 12:55 AM

or instance-type vrf.