Routing
Routing

how to have PPPoE subscribers share one filter and not each getting individual filter

‎05-20-2019 10:46 PM

Hi All,

 

We have PPPoE subscribers served by MX and free radius and all is well for now. 

currently the redius returns ingres/egress filter and each subscriber ends up with individual filter with his own couters.  the filter just references bandwidth policer. so each subsciber is ending up with 50mbps bandwidth polcer.  if i have some customers that i want to share one bandwith policer, how can i go about this? lets say i have 5 subscribers and i want this guys to share the 50mb link instead of each having 50mb filter attached per PP0 interface. 

 

 

Regards,
Lish
FON
3 REPLIES 3
Routing

Re: how to have PPPoE subscribers share one filter and not each getting individual filter

‎05-20-2019 11:02 PM

 

In that case, you will need to define CoS and apply it at subscriber's vlan interface.

 

 

 

 

 

 

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

Routing

Re: how to have PPPoE subscribers share one filter and not each getting individual filter

‎05-20-2019 11:12 PM
Routing

Re: how to have PPPoE subscribers share one filter and not each getting individual filter

‎05-21-2019 12:44 AM

Hello Lish,

 

You need to use hierarchical class of service, which may require MPC/MIC that supports it. Depedning on your access network configuration, you may want to use ACI based interface-sets:

https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/subscriber-management-ac...

https://www.juniper.net/documentation/en_US/junos/topics/concept/subscriber-management-aci-vlans-ove...

https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/interface-shared-filter-...

 

HTH


Best regards,
Sergii
-------------------------------------------------------------------
Please accept the solution if your problem is resolved Smiley Happy
-------------------------------------------------------------------