Routing
Highlighted
Routing

how to set the ip pool that the client will get pppoe server

‎11-23-2018 10:04 AM
I'm new with juniper

I'm wondering how to set the ip pool that the client will get pppoe server

2 REPLIES 2
Highlighted
Routing

Re: how to set the ip pool that the client will get pppoe server

‎11-23-2018 10:06 AM

There is many ways you can assisgn an IP Address to Client/Subscribers

 

1. You can return a Framed IPAddr from Radius.

2. Or You can you create a IP POOL locally as follows:

 

set access address-assignment pool TEST family inet network x.x.x.x/8
set access address-assignment pool TEST family inet range A low x.x.x.x
set access address-assignment pool TEST family inet range A high x.x.x.x

 

3. You can also define multiple IP local Pools and return framed-ip-pool VSA from radius to use a specfic pool for specfic subscriber(s).

 

 

/Karan Dhanak
Highlighted
Routing
Solution
Accepted by topic author vitor369789
‎11-23-2018 11:06 AM

Re: how to set the ip pool that the client will get pppoe server

‎11-23-2018 10:20 AM

BTW, In case if you're wondering how to return VSA from Radius, here is JuniperRadiusDictionary file

https://www.juniper.net/documentation/software/junos/junos161/radius-dictionary/unisphereDictionary_...

 

You need to update this file at your AAA/Radius Server in order to return VSA (vendor specfic attributes).

Or else, you also can simply assign IP addresses from Local Pool, an example given in my previous post.

 

 

 

 

 

 

/Karan Dhanak