Routing
Routing

juniper router displays all rpm probe failure

‎04-28-2017 06:20 AM

show services rpm probe-results

    Owner: CSKA-JP-RT01-To-CABJ-JP-RT01, Test: CSKA-JP-RT01-To-CABJ-JP-RT01

    Target address: 192.168.32.2, Source address: 192.168.32.1, Probe type: icmp-ping, Test size: 5 probes

    Probe results:

      Request timed out, Fri Apr 28 10:18:57 2017

    Results over current test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over last test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over all tests:

      Probes sent: 140, Probes received: 0, Loss percentage: 100



    Owner: CSKA-JP-RT01-To-CHOU-JPE-RT01, Test: CSKA-JP-RT01-To-CHOU-JPE-RT01

    Target address: 192.168.32.30, Source address: 192.168.32.29, Probe type: icmp-ping, Test size: 5 probes

    Probe results:

      Request timed out, Fri Apr 28 10:18:57 2017

    Results over current test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over last test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over all tests:

      Probes sent: 140, Probes received: 0, Loss percentage: 100



    Owner: CSKA-JP-RT01-To-CIBA-JPE-RT01, Test: CSKA-JP-RT01-To-CIBA-JPE-RT01

    Target address: 192.168.32.14, Source address: 192.168.32.13, Probe type: icmp-ping, Test size: 5 probes

    Probe results:

      Request timed out, Fri Apr 28 10:18:57 2017

    Results over current test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over last test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over all tests:

      Probes sent: 140, Probes received: 0, Loss percentage: 100



    Owner: CSKA-JP-RT01-To-CKAD-JPE-RT02, Test: CSKA-JP-RT01-To-CKAD-JPE-RT02

    Target address: 192.168.32.22, Source address: 192.168.32.21, Probe type: icmp-ping, Test size: 5 probes

    Probe results:

      Request timed out, Fri Apr 28 10:18:57 2017

    Results over current test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over last test:

      Probes sent: 5, Probes received: 0, Loss percentage: 100

    Results over all tests:

      Probes sent: 140, Probes received: 0, Loss percentage: 100

4 REPLIES 4
Routing

Re: juniper router displays all rpm probe failure

‎04-29-2017 03:48 AM

I'm not sure what your question is.  But the messages are showing that the configured RPM probes are failing.

 

You would need to look at the probe configuration and see what tests are being run and then determine why the tests are failing.

 

This is a sample RPM configuration so you can see where the commands are stored in your config.

 

https://www.juniper.net/documentation/en_US/junos12.1x47/topics/example/security-basic-rpm-probe-con...

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Routing

Re: juniper router displays all rpm probe failure

‎04-30-2017 07:34 PM

Hi Folks,

 

The real-time performance monitoring (RPM) feature allows network operators and their customers to accurately measure the performance between two network endpoints.

 

In general, You gather RPM statistics by sending out probes to a specified probe target, identified by an IP address or URL. When the target receives the probe, it generates responses, which are received by the device.

 

I would suggest to check the reachability of the network intended to be monitored by the probes manually to start with.

 

 

-Python JNCIE 3X [SP|DC|ENT] JNCIP-SEC JNCDS 3X [ WAN | DC|SEC] JNCIS-Cloud JNCIS-DevOps CCIP ITIL
#Please mark my solution as accepted if it helped, Kudos are appreciated as well.
Routing

Re: juniper router displays all rpm probe failure

‎05-03-2017 01:05 AM

RPM CONFIG WAS WORKING FINE EARLIER BUT GIVING SAME RTT VALUE.

 

The RPM configurations were removed and re-added and the results have been unsuccessful since the re-addition.

 show configuration services rpm 

traceoptions {

    file rpmtrace;

    flag all;

}

probe CSKA-JP-RT01-To-CABJ-JP-RT01 {

    test CSKA-JP-RT01-To-CABJ-JP-RT01 {

        probe-type icmp-ping;

        target address 192.168.32.2;

        probe-count 5;

        probe-interval 1;

        test-interval 30;

        source-address 192.168.32.1;

        data-size 100;

    }

}

probe CSKA-JP-RT01-To-CHOU-JPE-RT01 {

    test CSKA-JP-RT01-To-CHOU-JPE-RT01 {

        probe-type icmp-ping;

        target address 192.168.32.30;

        probe-count 5;

        probe-interval 1;

        test-interval 30;

        source-address 192.168.32.29;

        data-size 100;

    }

}

 

probe-server {

    udp {

        port 64000;

    }

}

Routing

Re: juniper router displays all rpm probe failure

‎05-03-2017 02:39 AM

Based on the configuration and output the following test is failing:

 

ping 192.168.32.22 source 192.168.32.21

 

You will need to find what is wrong on either the network or SRX configuration that the ping can no longer take place.

 

Run this on the cli and confirm this does not work.

 

Confirm the source address is a valid address on the SRX that can be used (should give an error on the ping attempt if note)

Run a trace route to see where the path to the device dies

 

traceroute 192.168.32.22 source 192.168.32.21

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home