Routing
Routing

monitor traffic interface lt-0/0/0.0

‎07-15-2019 12:23 AM

Hello,

 

Is monitor traffic interface lt-0/0/0.0 supported ?

Connection is UAR, ping works to, but this command isn't providing any output, it is some sort of issue or monitor traffic interface on lt and vtep interfaces isn't possible ?

 

Regards

2 REPLIES 2
Routing
Solution
Accepted by topic author rocketfkinscience
‎07-15-2019 06:12 AM

Re: monitor traffic interface lt-0/0/0.0

‎07-15-2019 02:58 AM

monitor traffic only shows traffic reaching the routing engine. lt- and vtep interfaces forwards traffic on the forwarding plane so not reaching the routing engine.

 

To monitor data on lt- or vtep I think you need to look at port-mirroring (expecting you are using an MX): https://www.juniper.net/documentation/en_US/junos/topics/usage-guidelines/services-configuring-port-...


--
Best regards,

Jonas Hauge Klingenberg
Systems Engineer, SEC DATACOM A/S (Denmark)
Routing

Re: monitor traffic interface lt-0/0/0.0

‎07-15-2019 05:49 AM

thank you!