Is there road map for PTP support on MX10008 ?
we are currently running 19.1R2
Please let me know if you have problem access this site:
https://apps.juniper.net/feature-explorer/parent-feature-info.html?pFName=Precision%20Time%20Protoco...You can see that MX10008 is not listed (while MX10003 is available, comparatively speaking), and if you look for MX10008 features in latest 19.2:https://apps.juniper.net/feature-explorer/displayFeatures.html?
My understanding is MX10K targets Timing support after 19.3R1
Please mark "Accepted Solution" if this helps.
Kudos are always appreciated
https://apps.juniper.net/feature-explorer/parent-feature-info.html?pFName=Precision%20Time%20Protoco...You can see that MX10008 is not listed (while MX10003 is available, comparatively speaking), and if you look for MX10008 features in latest 19.2:
PTP seems to be not supported on MX10008 until the current release 20.1.
Roadmaps are not public, please reach out to your AM or SE to check for current features.
As per this Document PTP are not supported in MX1008 Routers
Features Supported in 19.1R2 On MX10008 Release
If this solves your problem, please mark this post as "Accepted Solution".If you think that my answer was helpful, please spend some Kudos
I see that the roadmap for PTP is NOT supported for MX10008.
Also, you can see which all Juniper Products support PTP feature and from which version below:
MX10003 support PTP feature:
Fixed port PIC (6xQSFPP) and modular MIC (JNP-MIC1) on MX10003 routers from 17.3 Junos.
I hope this helps. Please mark this post "Accept as solution" if this answers your query.
Kudos are always appreciated!