Routing

 View Only
last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the vMX community. 

Need additional guidance?  Check out these Juniper Resources.

Documentation Technical Bulletins Knowledge Base Day One Books

Latest Discussion Posts

  • i have other question this is single homed mean to to reach the same destination with the same next hop with two proctol , for me it is the first time because in cisco when we have two proctols with the different next hop not ...

  • Thanks this was super helpful, I was thinking the input-relay option was a separate port as it lists 0-3, but I now understand you are setting the criteria for output-relay ports 0-3. I also read the guide but got a bit confused like I said with the ...

  • As far as I remember, by default both narrow and wide-metrics are enabled on both L1 and L2 for backward compatibility with routers, who do not support wide metrics. If both sides support wide metrics, it makes sense to keep wide metrics only by set ...

  • Hi John, If you want to have customer frames to be unchanged from start point to end point, you can use some kind of UNI port in terms of Metro Ethernet. It calls sometimes "transparent Ethernet" as it passes all types of frames. -----untagged ...

  • Hi, I have understood your concern. In mx and srx drop-probability linearly increasing. In qfx and ex switch it is different, just like the graph you mentioned. I have tested the same command "set interpolate fill-level 30 fill-level 50 drop-probability ...

  • Hello, The answer is C. OSPF preference is 10 , BGP preference is 170. Lower preference preferred. https://www.juniper.net/documentation/us/en/software/junos/routing-overview/bgp/topics/concept/routing-protocols-default-route-preference-values.html ...

    1 person recommends this.
  • Thanks Farid!! Wide metric is on by default on Juniper so extended TLV is also added, when enable wide metric only,is enabled , then internal TLV are suppressed., extended TLV are only present. But I was curious what would be the rational behind ...

Announcements

Unanswered Posts

Top Contributors in the Community