Routing

last person joined: 3 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  why counter did not increment on "show ldp traffic-statistics"?

    Posted 08-03-2008 22:25

    Hi,

    I try to test the routers with MPLS LDP. After configure the routers following the Juniper techical document, I test with the MPLS ping. It works fine. However, I try to use the router tester (N2X) to send the TCP streams from one port to another port of the RT. The traffic works fine, except the counter did not increment using the command "show ldp traffic-statistics".

     

    setup:

    -------

    RT(port0)--------R0----------R1--------R2---------RT(port1)

     

    Thanks,

    Tet



  • 2.  RE: why counter did not increment on "show ldp traffic-statistics"?
    Best Answer

    Posted 08-04-2008 05:00
    What you get if you do " show mpls lsp transit statistics " on transit router?
    What you get if you do " show mpls lsp ingress statistics " on ingress router?
    What you get if you do " show mpls lsp egress statistics " on egress router?

    The above commands will let you know the traffic is being lablel switched or packet switched (normal routing). This way you can indentify where is the problem exactly ingress, transit or egress.