SRX Services Gateway
Highlighted
SRX Services Gateway

802.1Q on Lines SRX

‎05-31-2019 02:19 PM

Hello, 

 

Can you tell me, what kind of series SRX support 802.1Q?

 

 

Thank you

3 REPLIES 3
Highlighted
SRX Services Gateway

Re: 802.1Q on Lines SRX

‎05-31-2019 03:44 PM
All of them do,. You may want to expand on your use case to ensure the exact implementation is supported.
Highlighted
SRX Services Gateway

Re: 802.1Q on Lines SRX

‎05-31-2019 05:25 PM

Hello Luis,

 

802.1Q stands for trunking, or L2 interfaces capable of passing traffic tagged by different vlans. In the SRX family, the High End SRXs do not support ethernet-switching (L2 interfaces), however the Branch SRXs do.

 

PLease refer to the following documents:

 

Quick example: 

 

https://www.fir3net.com/Firewalls/Juniper/juniper-srx-how-to-configure-ethernet-switching.html

 

More complete document:

 

https://www.juniper.net/documentation/en_US/release-independent/solutions/information-products/pathw...

 

I hope this helps.

 

 

 

Please mark this comment as the Solution if applicable
Highlighted
SRX Services Gateway

Re: 802.1Q on Lines SRX

‎05-31-2019 07:10 PM

Hi 

 

Yes, SRXes support 802.1Q VLAN tagging. I would like to know what is the deployment design you are looking at.

 

If you are looking at the classic Firewall on a stick (L3) where you trunk all the interested VLANs from the switch, you can do this on every SRX model.

 

Regards,

 

Vikas