SRX Services Gateway
Highlighted
SRX Services Gateway

Basic EX options in Branch SRX

‎06-28-2016 01:06 AM

Hi,

 

I am working on identifying identifying basic EX switching options with Branch SRX and am using CLI explorer for it.

http://www.juniper.net/techpubs/content-applications/cli-explorer/junos/

 

I am not able to find if "port-mode trunk|access.."  command on EX supported on SRX.

 

But I beleieve Branch SRX must be supporting this basic option, but I am not able to find..Similarly STP/RSTP/MSTP/VSTP is also not seen been supported on SRX by this CLI guide.

 

Am I missing anything? I checked across various releases..but could not find it.

 

Please suggest.

 

Thanks,

Shirsh

 

 

 

Shirish
4 REPLIES 4
Highlighted
SRX Services Gateway

Basic EX options in Branch SRX

‎06-28-2016 03:41 AM

Hi Shirish,

 

The branch SRX support the layer 2 functionality.

 

I am able to execute the steps.

 

Pl send me the config syntax for same to understand.

 

 

 

........
If this worked for you please flag my post as an "Accepted Solution".

Best Regards,
Suresh Mudhireddy

Attachments

Highlighted
SRX Services Gateway

Re: Basic EX options in Branch SRX

‎06-28-2016 05:27 AM

v
[edit]
root@Router-1# set interfaces ge-0/0/0 unit 0 family ethernet-switching ?
Possible completions:
<[Enter]> Execute this command
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
bridge-domain-type Bridge domain type
> filter Packet filtering
native-vlan-id Untagged packets on a trunk/tagged-access interface belong to this vlan
> policer Interface policing
port-mode Type of port mode
reflective-relay Reflective-relay mode for this interface
> vlan Virtual LAN parameters
> vlan-rewrite Specify VLAN translation
| Pipe through a command
[edit]
root@Router-1# set interfaces ge-0/0/0 unit 0 family ethernet-switching po
^
'po' is ambiguous.
Possible completions:
> policer Interface policing
port-mode Type of port mode
[edit]
root@Router-1# ... unit 0 family ethernet-switching port-mode ?
Possible completions:
access Interface mode is access
tagged-access Interface mode is tagged-access
trunk Interface mode is trunk
[edit]
root@Router-1# ... unit 0 family ethernet-switching port-mode  

 

 

Below URL's may be helpful

SRX Getting Started - Configure Ethernet ports for switching

http://kb.juniper.net/InfoCenter/index?page=content&id=KB16667&actp=RSS

 

Which ports on J-Series and SRX branch devices support Layer 2 switching?

http://kb.juniper.net/InfoCenter/index?page=content&id=KB15455&actp=search

 

How to configure Ethernet Switching in Chassis Cluster mode

http://kb.juniper.net/InfoCenter/index?page=content&id=KB21422&actp=search

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
Highlighted
SRX Services Gateway

Re: Basic EX options in Branch SRX

‎06-28-2016 06:30 AM

Thanks much Suraj.

 

I surely agree it supports, but I am not getting why this is CLI "....ethernet-switching port-mode access" is not appearing in SRX CLI Explorer : 

 

http://www.juniper.net/techpubs/content-applications/cli-explorer/junos/

 

Regards,

Shirish.

Shirish
Highlighted
SRX Services Gateway

Re: Basic EX options in Branch SRX

‎06-30-2016 03:50 AM

The issue seems to be the accuracy of the CLI explorer database or the linking method used to show you those options.

 

I've notified the team that creates these tools.  Hopefully, someone can look into what the issue is and get it adjusted for us.

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home