Hi Everybody,
I'm trying to set up IPv6 in my internal network and access IPv6 resources on the internet after setting up an IPv6 over IPv4 tunnel with a (free) tunnel broker (hurricane electric, he.net). However i'm having issues getting both local IPv6 to work, and reaching the end od the tunnel. I have a SRX210 running on 9.6r1.13. I have gotten a /48 adssigned to me, which im using in my internal LAN. The /48 = 2001:470:d45d::/48. I am also testing with a FEC address, but no go.
I wan't to start with troubleshooting local connectivity. I have auto configuration working for my ubuntu client. My client generates these addresses:
dennish@dennish-desktop:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:11:2f:91:6e:6b
inet addr:10.50.2.50 Bcast:10.50.2.255 Mask:255.255.255.0
inet6 addr: fec0::ffff:211:2fff:fe91:6e6b/64 Scope:Site
inet6 addr: 2001:470:d45d:dead:211:2fff:fe91:6e6b/64 Scope:Global
inet6 addr: fe80::211:2fff:fe91:6e6b/64 Scope:Link
Router has:
root@core-router# show interfaces vlan.502
family inet {
address 10.50.2.1/24;
}
family inet6 {
address 2001:470:d45d:dead::1/64;
address FEC0:0:0:FFFF::1/64;
}
The following config for router-advertisement has been set (timers are very low, for testing):
root@core-router# show protocols router-advertisement
traceoptions {
file router-advertisement;
flag all;
}
interface vlan.502 {
max-advertisement-interval 5;
min-advertisement-interval 3;
managed-configuration;
other-stateful-configuration;
prefix 2001:470:d45d:dead::1/64 {
on-link;
autonomous;
}
prefix FEC0:0:0:FFFF::/64 {
on-link;
autonomous;
}
}
The physical interface on which my PC is connected is simply a switchport in vlan 502and can ping the router on IPv4 and reach IPv4 internet correctly.
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members vlan-10.50.2.0;
}
}
}
}
root@core-router# show vlans
vlan-10.50.2.0 {
vlan-id 502;
l3-interface vlan.502;
}
From my client i can't ping the 2001, nor the FEC address. From my router i can't ping my client either.
When i run a wireshark trace, i see the client doing Neighbor Solicitations, but no answers to this. Router Advertisements are comming trough with the correct prefix.
I'm probably missing something very obvious, but my experience with IPv6 is a bit poor.
Dennis
#IPv6