Hello!
Model: srx100h2
JUNOS Software Release [12.1X44-D20.3]
I am getting this message in logs:
May 5 08:46:29 tco PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC 0 CPU utilization exceeds threshold, current value=96
May 5 08:46:56 tco PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC 0 CPU utilization exceeds threshold, current value=100
May 5 08:46:59 tco PERF_MON: RTPERF_CPU_THRESHOLD_EXCEEDED: FPC 0 PIC 0 CPU utilization exceeds threshold, current value=99
show chassis routing-engine
Routing Engine status:
Temperature 49 degrees C / 120 degrees F
Total memory 2048 MB Max 1024 MB used ( 50 percent)
Control plane memory 1104 MB Max 486 MB used ( 44 percent)
Data plane memory 944 MB Max 538 MB used ( 57 percent)
CPU utilization:
User 28 percent
Background 0 percent
Kernel 62 percent
Interrupt 0 percent
Idle 9 percent
Model RE-SRX100H2
Serial ID BZ5013AF0799
Start time 2014-04-14 16:03:47 GMT+4
Uptime 20 days, 17 hours, 11 minutes, 28 seconds
Last reboot reason 0x1:power cycle/failure
Load averages: 1 minute 5 minute 15 minute
2.04 1.58 1.29
show system processes extensive
last pid: 54611; load averages: 0.87, 0.93, 0.70 up 20+16:48:00 08:51:17
136 processes: 16 running, 106 sleeping, 2 zombie, 12 waiting
Mem: 221M Active, 108M Inact, 1024M Wired, 157M Cache, 112M Buf, 463M Free
Swap:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
1440 root 5 76 0 994M 59316K select 0 567.5H 104.44% flowd_octeon_hm
22 root 1 171 52 0K 16K RUN 0 375.6H 27.78% idle: cpu0
1098 root 1 100 0 12788K 4784K RUN 0 701:19 20.26% eventd
1458 root 1 98 0 13572K 6356K select 0 590:25 18.75% rtlogd
24 root 1 -20 -139 0K 16K WAIT 0 370:43 0.00% swi7: clock
27076 root 5 76 0 80568K 70704K select 0 273:44 0.00% named
1462 root 1 76 0 12396K 5784K select 0 132:00 0.00% license-check
show security monitoring fpc 0
FPC 0
PIC 0
CPU utilization : 13 %
Memory utilization : 57 %
Current flow session : 546
Current flow session IPv4: 546
Current flow session IPv6: 0
Max flow session : 524288
Total Session Creation Per Second (for last 96 seconds on average): 67
IPv4 Session Creation Per Second (for last 96 seconds on average): 67
IPv6 Session Creation Per Second (for last 96 seconds on average): 0
show task accounting
Task Started User Time System Time Longest Run
Scheduler 1181 0.184 0.200 0.000
LMP Client 282 0.089 0.097 0.000
Memory 23 0.001 0.001 0.000
hakr 5 0.000 0.000 0.000
PIM I/O./var/run/ppmd_con 105 0.007 0.007 0.000
BFD I/O./var/run/bfdd_con 105 0.007 0.007 0.000
KRT 425 0.024 0.025 0.000
Redirect 8 0.000 0.000 0.000
MGMT_Listen./var/run/rpd_ 8 0.003 0.002 0.000
SNMP Subagent./var/run/sn 196 0.046 0.051 0.000
Should I be worried about this messages?