SRX Services Gateway
SRX Services Gateway

Comit error message

‎09-19-2016 05:33 AM

Hello everyone!

 

Today I was going to enable some debugging stuff and then I found some config which seems uncommited. I did rollback 0 and issued the commands in order to enable these debug stuff, but when I ran commit, it gaves me the following message, along with the config which was uncommited in the past:

 

warning: patch removes statement that is not empty

 

I have also tried to clean the configuration that was causing these messagesm but it still apears. Is there any idea how to overcome this? Is this related to a bug?

 

Best regards!

 

Vitor

4 REPLIES 4
SRX Services Gateway

Re: Comit error message

‎09-19-2016 06:12 AM

Hi vstrabello,

 

Are you configuring it in private mode ? Can you share the output of the commit command with the error message ? If you are configuring it in Private Mode try logging out and log in again in normal configure mode and do "commit full".

 

Thanks,
Hisham

Please accept my comment as a solution, if it helped in resolving your issue, to help guide other commentators and encourage others.
SRX Services Gateway

Re: Comit error message

‎09-19-2016 07:08 PM

Hi,

 

Rebooting the SRX would take care of the message.

 

Regards,

Sahil Sharma

---------------------------------------------------

Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: Comit error message

‎11-20-2018 02:10 AM

I was facing the same issue - rebooting the firewall worked for me.

 

Thanks

SRX Services Gateway

Re: Comit error message

‎08-05-2019 02:36 PM

Commit full is fixed my issue.

{master}[edit]
labroot@# commit
re0:
configuration check succeeds
re1:
[edit protocols isis interface xe-0/0/19.0 level 1 metric]
'metric 2'
warning: patch removes statement that is not empty >>>>
error: remote load-configuration failed on re1

{master}[edit]
labroot@# commit full
re0:
configuration check succeeds
re1:
commit complete
re0:
commit complete

{master}[edit]
labroot@#