SRX Services Gateway
Highlighted
SRX Services Gateway

Configure fxp0 in srx chassis cluster

‎07-03-2014 05:46 AM

Hello!  I would like to understand any details about configuring fxp0 in SRX chassis cluster/

 

1. Can I place fxp0 into custom routing-instance ? 

2. If I can, this is done by the same rules as the physical interface?

6 REPLIES 6
Highlighted
SRX Services Gateway
Solution
Accepted by topic author vlazarev
‎08-26-2015 01:27 AM

Re: Configure fxp0 in srx chassis cluster

‎07-03-2014 05:52 AM

What is the SRX prodcut that you are using, every SRX model has defined set of ports in chassis cluster.

 

You cannot put the fxp0 in custom-routing-instance. It is not supported at all.

Highlighted
SRX Services Gateway

Re: Configure fxp0 in srx chassis cluster

‎07-03-2014 06:05 AM

Hi vlazarev,

 

The fxp0 port is dedicated as the out-of-band management interface and it cannot be used in any routing instances or made part of any zones.

 

it is strictly for management.

 

Following KB article help you with configuring fxp0 and understand it.

 

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17161
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/services-gateway-srx2...

 

Regards
rparthi

 

[Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too] .....

Highlighted
SRX Services Gateway

Re: Configure fxp0 in srx chassis cluster

‎07-03-2014 06:13 AM

 rparthi,

Thanks for details!

Highlighted
SRX Services Gateway

Re: Configure fxp0 in srx chassis cluster

[ Edited ]
‎07-03-2014 06:26 AM

Can I get the Management access via  telnet or SSH through interface RETH ?

Highlighted
SRX Services Gateway

Re: Configure fxp0 in srx chassis cluster

‎07-03-2014 06:42 AM

Hi Vlazarev,

 

Yes. You can take management or SSH access through reth interfaces.

........
If this worked for you please flag my post as an "Accepted Solution".

Best Regards,
Suresh Mudhireddy
Highlighted
SRX Services Gateway

Re: Configure fxp0 in srx chassis cluster

[ Edited ]
‎07-03-2014 06:50 AM

In another words, there is no principal difference how i will manage my Chassis cluster ( via fxp0 or RETH).

 

If it is so, thank you for your answer!