Hello,
Everything is OK but my DHCP is not working.
If I put fixed IPs into machines they work normally, if I let DHCP on so the computers get APIPA addresses.
I am not a Juniper Expert so If somoene can help me I will paste down my CLI lines.
Note that I am using a SRX300 and I already restarted the DHCP services.
zones {
security-zone Internal {
host-inbound-traffic {
system-services {
http;
https;
ping;
dhcp;
}
}
interfaces {
ge-0/0/5.0 {
host-inbound-traffic {
system-services {
ping;
dhcp;
http;
https;
ssh;
telnet;
}
}
}
ge-0/0/1.0 {
host-inbound-traffic {
system-services {
ping;
snmp;
http;
https;
ssh;
telnet;
}
}
}
}
}
security-zone Internet {
host-inbound-traffic {
system-services {
ping;
http;
https;
ssh;
telnet;
}
}
interfaces {
st0.0;
ge-0/0/0.0;
}
}
security-zone internal;
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 187.32.128.193/27;
}
}
}
ge-0/0/1 {
unit 0 {
family inet {
address 10.196.136.1/24;
}
}
}
ge-0/0/5 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
st0 {
unit 0 {
family inet;
family inet6;
}
}
}
routing-options {
static {
route 10.0.0.0/8 next-hop st0.0;
route 0.0.0.0/0 next-hop 187.32.128.222;
}
}
protocols {
l2-learning {
global-mode switching;
}
}
access {
address-assignment {
pool rotem_pool {
family inet {
network 10.196.136.0/24;
range rotem_pool {
low 10.196.136.50;
high 10.196.136.220;
}
dhcp-attributes {
name-server {
10.196.24.31;
}
router {
10.196.136.1;
}
}
}
}
}
}