SRX Services Gateway
SRX Services Gateway

DYN DNS Support

‎08-29-2012 01:47 AM

Hi All

 

Can anyone tell me if the SRX range supports DYN DNS. If not when will it be available?

 

TX

1 REPLY 1
Highlighted
SRX Services Gateway

Re: DYN DNS Support

‎08-29-2012 02:04 AM

I have not seen anything in relation to this in Junos 12.x.  As of 11.1 it is still only supported via a script available here:

 

http://forums.juniper.net/jnet/attachments/jnet/junos-automation/392/1/dyn-dns-update.xslt.zip

 

Then it can be used in the folllowing way:

 

set system services apply-macro dyndns-client1 hostname XXX.dyndns.org
set system services apply-macro dyndns-client1 password <PASSWORD>
set system services apply-macro dyndns-client1 type dyndns
set system services apply-macro dyndns-client1 username <USERNAME>

set event-options policy dyn-dns-updater events SYSTEM
set event-options policy dyn-dns-updater attributes-match SYSTEM.message matches "EVENT Add"
set event-options policy dyn-dns-updater then event-script dyn-dns-update.xslt

set event-options event-script file dyn-dns-update.xslt

 

Found this post also on it from the forums here,  similar stuff:

 

http://forums.juniper.net/t5/SRX-Services-Gateway/How-to-configure-SRX-device-as-DDNS-client-and-Des...

MMcD [JNCIP-SEC, JNCIS-ENT, CCNA, MCP]
____________________________________________________

[Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too]
Feedback