SRX Services Gateway
SRX Services Gateway

E1 card parameters

‎03-02-2010 02:28 PM

Hi guys need someone help.I have T1/E1 card and want to configure the card as E1 card rather than T1.When card is installed on srx210h it comes up as T1/E1 card on the "sh chasis hardware.But when I do "sh inter" or Sh inter extensive it has but T1 parameters on framing and line-coding. I will like to configure this card as E1 rather than a T1.I know on M-series you can configure framing on "edit chasis" but can't see nothing on the SRX.Any help will be grateful.

2 REPLIES 2
SRX Services Gateway

Re: E1 card parameters

‎03-04-2010 10:28 AM

Figured it out. When card is installed it comes up as T1. To toggle to E1

 

[edit interfaces]
root# rename t1-1/0/0 to e1-1/0/0
SRX Services Gateway

Re: E1 card parameters

‎12-11-2010 06:49 AM

Did not work on SRX240, any advice ??